Park Tool
PARK TOOL – CROWN RACE SETTING SYSTEM
The CRS-1 offers six inserts with which to install the fork crown race. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1" inserts, and three 1-1/8" inserts. The CRS-1 will work on forks of 340mm column length or less.
PARK TOOL – CHAIN TOOL
A professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM® AXS® 12-speed, Shimano® 12-speed chains and Campagnolo® 13-speed chains.
The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP).
Works with single speed half-links.
*The CT-3.3 will install, but not peen, Campagnolo® 11, 12 and 13-speed chain rivets (see CT-4.3 or CT-6.3)
PARK TOOL – CROWN RACE SETTING SYSTEM — OVERSIZED
The CRS-15.2 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm.
PARK TOOL – ADJUSTABLE CROWN RACE PULLER
The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. The tool is fully adjustable, allowing precise, independent positioning of the blades around the crown race. Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions.
PARK TOOL – CYCLONE™ CHAIN SCRUBBER
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts.
PARK TOOL – PROFESSIONAL CHAIN SCRUBBER
A daily use, shop version of our world famous CM-5.3 Chain Scrubber. The CM-25 features a super tough die cast aluminum case and handle plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Our proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use.
PARK TOOL – HYDRAULIC BRAKE BLEED KIT — MINERAL
The BKM-1 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, Clarks®, Promax®, Tektro®, and TRP®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance.
The BKM-1 is built for the rigors of daily commercial use, and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a unique attachable syringe mount, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
PARK TOOL – HYDRAULIC BRAKE BLEED KIT — DOT
The BKD-1 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance.
The BKD-1 is built for the rigors of daily commercial use, and includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
PARK TOOL – BOTTOM BRACKET AND LOCKRING TOOL — 16-NOTCH
The BBT-9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap on Shimano® Hollowtech II® systems. The BBT-9 fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm.
PARK TOOL – BOTTOM BRACKET / CASSETTE LOCKRING TOOL — CAMPAGNOLO®
PARK TOOL – BOTTOM BRACKET AND LOCKRING TOOL — 8-NOTCH
The BBT-18 is a heavy duty, investment cast tool for installing and removing the following:
- Shimano® Octalink® right side bottom bracket cup with external notches
- Bontrager® ISIS Drive™ bottom bracket cups
- Front chainring lockring for Bosch® Gen 3 and Gen 4 e-bike systems and Specialized® Levo® Brose® e-bike systems